At present, there are many types of conductive slip rings in the market, which can be distinguished according to the overall structure, or according to the type of transmission signal and according to the application field. The function is to connect the mechanical part and the electrical part of a device, the mechanical part is rotated, the slip ring prevents the winding, and at the same time transmits the electrical signal to the electrical part. It is generally used in the fields of aerospace, medical, intelligent equipment and instruments.
Conductive Slip Ring The following introduces a conductive slip ring in detail. This slip ring includes a stator, a slidable sleeve, and a rotor that is sleeved inside the stator. The rotor includes a main shaft, a conductive ring that is fixed on the outer periphery of the main shaft, and the inner wall of the conductive ring is bonded. Connected rotor wires, the main shaft is provided with a shaft hole extending in the axial direction for connecting with the equipment rotating shaft, the main shaft is provided with a mounting hole penetrating through the side wall, and a fastener is provided in the mounting hole for contacting the outer wall of the equipment rotating shaft; The stator includes a casing and brush filaments, the brush filaments are located between the casing and the main shaft, one end of the brush filaments is connected with a stator wire, and the other end of the brush filaments abuts against the outer wall of the conductive ring. This new type of conductive slip ring is equipped with a shaft hole inside the main shaft and a mounting hole on the side wall, and the main shaft and the equipment shaft are fixed by fasteners; at the same time, the conductive slip ring is provided with a conductive ring and brush wire that are relatively rotating and conducting, so that the stator The wires are connected with the rotor wires, and the power transmission is realized on the basis of avoiding winding wires. Because the conductive slip ring has the advantages of long service life and small size, it basically replaces the traditional slip ring. Generally, low-speed slip rings can be used for ten to fifteen years. Compared with traditional collector rings, this new type of slip ring does not require regular inspection and maintenance, but must be operated in accordance with the instructions during installation. We have slip ring connectors for sale, and you can contact us if you need them.
